T2 5-Series par AgXeed
AgXeed
- Date de création : 2019
- Contact commercial : Jonatan Mueller (Europe) - Sam Scales (Australia) (jonatan.mueller@agxeed.com)
agxeed@landpower.com.au - Site internet : http://www.agxeed.com
Netherlands
AgXeed conçoit des robots agricoles autonomes et des logiciels intelligents afin d'améliorer l'efficacité et la durabilité des exploitations agricoles.
T2 5-Series par AgXeed
Types de cultures
Légumes
Etapes de culture
In-crop management | chemical weeding
In-crop management | mechanical weeding
In-crop management | laser weeding
Vue d'ensemble technologique
- Dernière révision : 02/07/2026
- Date de sortie commerciale : 2019
- Application : AGXEED focuses on improving labour quality and availability through autonomous farming solutions.
Vue d'ensemble de commercialisation
- Niveau de préparation technologique : 10: Introduction sur le marché - Pleine opération commerciale
- Unité en service - Global : 101 to 150
- Modèle économique : Direct sales / Distributor network / Other
- Prix :
- Coûts de fonctionnement : AgXeed TraXwise & Safety RTK subscription package is required to use autonomy and all new machines are sold with 3years of this subscription included. This subscription package is valued a ~$7000/Year.
Couverture du marché, distributeurs et fournisseurs de services
- Pays ou marchés adressés :
Europe, UK, USA, Canada, Australia, New Zealand
Performance & Impact Économique
- ROI estimé :
Dependant on specific application and machine utilisation rate.
- Économies de produits phytosanitaires :
Decouples Labour from field operations, ~80-90% saving.
- Amélioration du rendement :
Low ground pressure driveline reduces permanent soil structure damage.
Caractéristiques techniques
- Type de solution : Plateforme/porteur autonome
- Source d'énergie : Diesel
- Puissance de tracteur requise :
- Taille :
- Metric: 385cm x 346cm x 180cm
- Imperial: 12.6 × 11.4 × 5.9 feet
- Poids net : 7600kg (16,755 lb)
- Taille d'exploitation min. (en hectares) : ~100ha (247 acres)
- Débit de Chantier : Completely dependant on the task and local environment
- Vitesse de travail maximale : 12.5km/h (7.8 mph)
- Entraxe : 600 mm (≈ 24 in) track belt = 2.25–3.2 m (≈ 7.4–10.5 ft) track centre 300 mm (≈ 12 in) track belt = 1.9–3.2 m (≈ 6.2–10.5 ft) track centre
- Puissance : 156hp
Fonctionnalités et technologies
- Fonctionnalité principale : The AGXEED T2 5-Series is a fully autonomous agricultural robot tractor designed to take over repetitive field operations such as seeding, cultivation, seedbed preparation, mowing, subsoiling, and stubble management. It enables farmers to complete these tasks with consistent accuracy, reduced labour dependence, and the ability to work for extended periods with minimal supervision.
- Logiciel : Duel GNSS Receivers with a Local RTK signal for guidance with an additional Safety RTK signal direct from satellite for bostical detection
- Connectivité : All AgXeed machines require an internet connection to download their tasks and to broadcast data back to the TraXwise portal. Landpower supply all machines with a Starlink interface kit to enable the farmer to install their own dish for reliable data connection. As standard the AgXeed utilises Ntrip RTK correction signal, his ca come from a local base station or from a network basted solution service. there are Radio receiver options available too. With field, machine & implement data loaded into the AgXeed TraXwise portal, machine path/task planning is intuitively configured by the user.
- Outils compatibles : Any standard 3 point linkage mounted implements for Tillage, seeding, weeding, spraying etc. The T2 5-Series has a linkage lift capacity of 3t on the front and 8t on the rear.
Plan de développement
- Prochaine phase de développement :